Platte Valley Atv and C&Dracing | home
PRODESIGN
Air Filters
TRX400EX, Banshee, Warrior - Pro-Flow Air Box Filter Kit
The "Pro Flow" Intake Kit entirely replaces faulty, restrictive stock air filters, and adaptors. These billet /CNC kits include a positive seal O-Ring seal, 2 Stage High Volume Foam Air Filter, with a 3rd Stage Filter wrap, and all mounting hardware. This kit can save hundreds of dollars in engine repairs.
Pro-Flow Kit w/Foam Filter
|
from $90.00
|
Pro-Flow w/K&N Filter
|
from $95.00
|
Pro-Flow Base Only (K&N)
|
from $60.00
|
Pro-Flow Base Only (Foam)
|
from $60.00
|
Pro-Flow K&N Filter
|
from $45.00
|
Pro-Flow K&N Precharger
|
from $15.00
|
Pro-Flow Foam Filter and Wrap
|
from $35.00
|
Pro-Flow Foam Filter Outer Wrap
|
from $16.00
|
CoolHeads
Billet aluminum/cnc cylinder heads are available for many high performance applications. These state-of-the-art heads have replaceable combustions chambers for easy tuning, or custom order for your applications (altitude, port timing, and fuel, etc.) Up to 70% better cooling, increased reliability and CAD assisted designed combustion chambers insure maximum performance.
extra domes for $40 each
Pro Design Coolhead W/Domes
|
17cc, 18cc, 19cc, 20cc, 21cc, 22cc
|
BANSHEE
|
$255.00
|
Pro Design Coolhead W/Cylinder Support And Dome
|
20cc, 21cc, 22cc
|
TRX250R
|
$210.00
|
Pro Design Coolhead W/Cylinder Support And Dome
|
18cc, 19cc, 20cc, 21cc, 22cc
|
QUADRACER-250-(87-92)
|
$210.00
|
Pro Design Coolhead W/Domes
|
59cc, 62cc
|
QUADRACER-500
(87,88,89,90)
|
$225.00
|
Timing Plates
Pro Design Ignition Advance Plate
|
BANSHEE
|
$call
|
Manifold
Pro Design Intake Manifold W/Boost Bottle
|
26-28mm, 34-35mm
|
BANSHEE
|
$call
|
Pro Design Intake Manifold
|
26-28mm, 34-35mm
|
BLASTER
|
$call
|
Reed Spacers $call Banshee$call
Produce more top end, & allow larger carburetors to clear clutch, arms, etc.
TRX250R 86-89
LT250R/500 88-90
Banshee 87-01
Blaster 88-01
No Leak Exhaust Collars
Special high temp military spec internal O-rings expand with heat to lock the clamp into place
ATC250R 85-86 Fits FMF
TRX250R 86-89 Fits FMF
LT250R 85-92 Fits FMF
Banshee 87-01 Fits FMF, Stock, Toomy, DMC
Blaster 88-01 Fits FMF, Stock
Shift Levers $call
Billet/CNC shifters eliminate breakage associated with stock shift levers
More positive feel and no flex for positive power shifts.
ATC/TRX250R 85-89
TRX400EX 99-01
Blaster 88-01
Banshee 87-01
Banshee 87-01 (SHORTY)
Gas Caps $call
Aluminum
Features a one way check valve
Banshee 87-01
Warrior 87-01
Blaster 88-01
TRX250R 85-89
TRX400EX 99-01
Super Coolers $call
An in-line temperature reducer that increases cooling efficiency of any water cooled system
Reduces temperature by and average of 5-10 degress
Tether Kill Switches $30.00
The #1 quality ATV kill switch
used by most top ATV champions
Colors
Black
White
Red
Blue
Yellow
Purple
Water Impellers $66.00
Billet aluminum impeller replaces the low volume plastic unit
Not only will this impeller not break like the stock plastic, it provides up to 35% more efficient cooling
Design features include a stainless steel shaft
Banshee
Aluminum Radiator $call
Maintain Better operating temperature under the most extreme conditions
Uses all stock mounting brackets
Banshee
Coolant Drain Covers $call
This aluminum/CNC plate completely replaces the stock water pump plate and provides easy access to removing coolant without hassling with radiator lines
Banshee
Case Guard $27.00
Protects case from chain breakage
Light weight billet design
Helps prevent bunching of the chain
Will accommodate up to 15 tooth sprocket
TRX400EX
C&D Racing
4855 S 66th Circle
Omaha NE 68117
|